• Welcome back! Thank you for being a part of this Traders Community. Let's discuss and share :)
    Selamat datang kembali! Trimakasih telah menjadi bagian dari Komunitas Trader ini. Mari berdiskusi dan berbagi :)

Suggestion I will make a Free EA with your Indicator

Reader mode
MONIRBD said:
Dear hemmy,If you buy VPS at lowest or Cheapest Best VPS.www.socialvps.net or www.fxsvps.com/net.I think social VPS is also cheapest but very good service.
Click to expand...

Dear Hemmy,Do you emphasis https://soehoe.id/i-will-make-a-free-ea-with-your-indicator.t9801/page-450#post-288875 this EA.If you add another Indicator.I have more times analysis this System.If you kindly give sometimes attentively I confidently Believe that you can gives us Best strategy.It is very simple but Profitable.you can add others Indictor fo update for making EA that you think.Best of luck.
 
majidlovio said:
mr tanaka can you make EA with this indicator?


Three Drives 6.0
Metatrader Indicator (MT4/MT5)

  • Overview
    The Three Drives pattern is a 6-point reversal pattern characterised by a series of higher highs or lower lows that complete at a 127% or 161.8% Fibonacci extension. It signals that the market is exhausted and a reversal can happen.
    • Find three drives patterns easily
    • Learn the basics of harmonacci patterns
    • Useful to find cheap and expensive zones
    • Customizable 1-2-3 and 0-A-B ratios (for purists)
    • It implements visual/sound/push/mail alerts
    Three Drives patterns can expand/repaint quite a bit. To make things easier this indicator implements a twist: it waits for a donchian breakout in the right direction before signaling the trade. The end result is an otherwise repainting indicator with a very reliable trading signal.
    • Bullish retracements are blue
    • Bearish retracements are red
    • The breakout period for the trade is customizabl
Screenshots
Click to expand...
Hi Majidlvio,
Do you have mq4 of this indicator please ?
 
tanaka akiko said:
I am trying to code your idea.

View attachment 74231

I used trailing stop for attack martin, which is additional orders for ARROW SELL signal.
View attachment 74232

You can control attack martin orders by trailing stop (not by xx pips). I deleted xx pips attack, instead you can control orders with trailing.
You can select opposite signal close =TRUE if you want, but the result is not good...
Click to expand...
Hi Mr TANAKA San please,

Could u help add a function to this modified revC version?

Just by closing all attack martingale while signal(buy/sell) switch to the other side?

Very very kind of u
 
tanaka akiko said:
I am trying to code your idea.

View attachment 74231

I used trailing stop for attack martin, which is additional orders for ARROW SELL signal.
View attachment 74232

You can control attack martin orders by trailing stop (not by xx pips). I deleted xx pips attack, instead you can control orders with trailing.
You can select opposite signal close =TRUE if you want, but the result is not good...
Click to expand...
Hi Mr TANAKA San please,

Could u help add a function to this modified revC version?

as up there desribed ? it will be very great improvement integrated with Attack Martin system
 
tanaka akiko said:
HI, magoo
Can you find the best setting? :cool::ok:
View attachment 74649
Click to expand...

Hello Tanaka,
there is already a good set for Ma_BBands_v3.3 version ... ( take a look ... remember to delete the suffix (.txt) from the template file)


I found, however, anomalies in the EA ...
Could you kindly correct them, please?


I refer to the EA with the indicators
(see snapshot (3) and (4), please):
It takes only 6 parameters for the first one (see snapshot (3)), delete the second one (please) and add the missing (7th) parameter (Ma period) for the third one (see snapshot (4) ,
the one that fits the best strategy in my opinion (see snapshot (5)(6)) ...


I wondered if it is possible ...
working in m15 timeframe,
... to define the possible Target Price with the indi Ma_BBands_v3.3
around its Bollinger bands, (seeing it in the chart h1 and h4)?
As if it were an MTF indi ...

To understand what I mean, see the snapshot (6) with the large, fine and dashed green lines as Supports in (h4), (h1), (m15) for the hypothetical overlapping of the BBs ...
( and red lines for the resistances ...)

(and if so, how?)

Regards
mag00

P.S.
(I would leave the third indi and the first indi for those who wanted to find other settings ...)
 

Attachments

  • (1)Ma_Bbands parameters.png
    (1)Ma_Bbands parameters.png
    106.6 KB · Views: 138
  • (2)Ma_Bbands_v3.3 parameters.png
    (2)Ma_Bbands_v3.3 parameters.png
    108.6 KB · Views: 135
  • (3)EA_Ma_Bbands (6 parameters, please ...).png
    (3)EA_Ma_Bbands (6 parameters, please ...).png
    202.8 KB · Views: 132
  • (4)EA_Ma_Bbands_v3.3 (7 parameters, please ...).png
    (4)EA_Ma_Bbands_v3.3 (7 parameters, please ...).png
    165.5 KB · Views: 129
  • (5)best strategy ... the indi ... Ma_BBands_v3.3 ... (are to be preferred) ....png
    (5)best strategy ... the indi ... Ma_BBands_v3.3 ... (are to be preferred) ....png
    58.1 KB · Views: 129
  • (6) best strategy ... Ma_BBands_v3.3 ... (are to be preferred) ....png
    (6) best strategy ... Ma_BBands_v3.3 ... (are to be preferred) ....png
    54.1 KB · Views: 142
  • MA_BBands.mq4
    MA_BBands.mq4
    8.3 KB · Views: 48
  • MA_BBands_v3.3.mq4
    MA_BBands_v3.3.mq4
    11.1 KB · Views: 51
  • SET indicator(MA_BBands_v3.3).set.txt
    SET indicator(MA_BBands_v3.3).set.txt
    96 bytes · Views: 37
Last edited:
tanaka akiko said:
I am trying to code your idea.

View attachment 74231

I used trailing stop for attack martin, which is additional orders for ARROW SELL signal.
View attachment 74232

You can control attack martin orders by trailing stop (not by xx pips). I deleted xx pips attack, instead you can control orders with trailing.
You can select opposite signal close =TRUE if you want, but the result is not good...
Click to expand...
Mr TANAKA san,

The problem is the attack Martin in this one cannot be fully closed after profit reached(the last few orders may remained there and would continue to be there until another grid is built up and more new Martin orders will be remained unclosed after profit, and cause big DD

Kindly advise that to add the function so that we can close the grid down after trend indicator changes direction, as I mentioned above,
or set specific sl for the whole grid in either buy or sell direction(which in the Rev C version seemed unable to be performed, as I open sl, the wonderful attack Martin will not place additional orders.)(and all these functions yet not given in the rev D version of fxnuke, especially your wonderful work of attack Martin)

Also I think to allow change of the attack Martin's order pip distance will be great to use in backtesting

Thank u so much!

Hope we together can help to make a holy grail out of these!
 
tanaka akiko said:
Saidi
MT-1 at account-1, you put total 9 charts. (9 EA)
So, please set like this.
For TF-M1 chart, put magic 101, then basket close magic =101,102,103.201,202,203,301,302,304
For TF-M1 chart, put magic 102, then basket close magic =101,102,103.201,202,203,301,302,304
For TF-M1 chart, put magic 103, then basket close magic =101,102,103.201,202,203,301,302,304
For TF-M5 chart, put magic 201, then basket close magic =101,102,103.201,202,203,301,302,304
For TF-M5 chart, put magic 202, then basket close magic =101,102,103.201,202,203,301,302,304
For TF-M5 chart, put magic 203, then basket close magic =101,102,103.201,202,203,301,302,304
For TF-M15 chart, put magic 301, then basket close magic =101,102,103.201,202,203,301,302,304
For TF-M15chart, put magic 302, then basket close magic =101,102,103.201,202,203,301,302,304
For TF-M15 chart, put magic 304, then basket close magic =101,102,103.201,202,203,301,302,304

EA will read basket close magic =101,102,103.201,202,203,301,302,304 and close these.
Don't use the same magic number in MT2, otherwise EA (MT-1) will close MT-2 orders..
Click to expand...
Hello Mr Tanaka,
why do not I close any of the open orders, Thank you very much for your help?
 
Mr Tanaka,

Can you please make an EA from the following indicators
Order signal from the indicator ProfitableStrategy_5.
The other two indicators should be usable as filters. We should be able to choose whether we want to use one of these two filters, or both, or none of them.
If we use both, then for example a buy order will be PS_5 (Green), DDFX(blue), PS_13(Buy>50%)

Use your latest tamplate and put the parameters of two indicators (PS_5, DDFX) inside the EA

Thanks
 

Attachments

MR TANAKA. THANKS FOR GOOD WORK ON THIS BLOG. U RELY MAKE A LOT OF US HERE A BETTER E.A TRADER. pls help to add martingale base on NEXT SIGNAL or ARROW not martingale pips-step to the following e.a . i have a setting formula that will help every body on this thread. pls add 'martingale base on next signal or arrow'
 

Attachments

SP_AFAD said:
Mr Tanaka,

Can you please make an EA from the following indicators
Order signal from the indicator ProfitableStrategy_5.
The other two indicators should be usable as filters. We should be able to choose whether we want to use one of these two filters, or both, or none of them.
If we use both, then for example a buy order will be PS_5 (Green), DDFX(blue), PS_13(Buy>50%)

Use your latest tamplate and put the parameters of two indicators (PS_5, DDFX) inside the EA

Thanks
Click to expand...
SP_AFAD said:
Mr Tanaka,

Can you please make an EA from the following indicators
Order signal from the indicator ProfitableStrategy_5.
The other two indicators should be usable as filters. We should be able to choose whether we want to use one of these two filters, or both, or none of them.
If we use both, then for example a buy order will be PS_5 (Green), DDFX(blue), PS_13(Buy>50%)

Use your latest tamplate and put the parameters of two indicators (PS_5, DDFX) inside the EA

Thanks
Click to expand...


Does this indicator repaint?
 
ijjkkumo said:
Mr TANAKA san,

The problem is the attack Martin in this one cannot be fully closed after profit reached(the last few orders may remained there and would continue to be there until another grid is built up and more new Martin orders will be remained unclosed after profit, and cause big DD

Kindly advise that to add the function so that we can close the grid down after trend indicator changes direction, as I mentioned above,
or set specific sl for the whole grid in either buy or sell direction(which in the Rev C version seemed unable to be performed, as I open sl, the wonderful attack Martin will not place additional orders.)(and all these functions yet not given in the rev D version of fxnuke, especially your wonderful work of attack Martin)

Also I think to allow change of the attack Martin's order pip distance will be great to use in backtesting

Thank u so much!

Hope we together can help to make a holy grail out of these!
Click to expand...
RevC is special version as I was requested.
You can use RevD for attack martin.
Also attack martin has tp/sl if you want.
upload_2019-3-5_10-12-16.png
 

Attachments

  • upload_2019-3-5_10-12-16.png
    upload_2019-3-5_10-12-16.png
    6.8 KB · Views: 864
Reader mode
You must log in or register to reply here.
Back
Top