• Welcome back! Thank you for being a part of this Traders Community. Let's discuss and share :)
    Selamat datang kembali! Trimakasih telah menjadi bagian dari Komunitas Trader ini. Mari berdiskusi dan berbagi :)

Suggestion I will make a Free EA with your Indicator

Reader mode
Ahmad Khan said:
I have received so many inbox messages for my another EA/Robot Zaman Khan ScoopyzaM and people try to confuse other members as they gave a reference of other robot which created more confusion to others, so please find below attached file which I have posted here in the group to avoid any confusion.

In order to use it, as EA based on history data and no indicator is used, so before using it, download concerned pair history data and better results are on M5 and more secure on M15, so its your choice. As mentioned above it is based on history data so whenever you will do backtest, you will find different results however all results will end on maximum profit so do not try to match result figures to confuse yourself.

Do back test it before running it on live, however EA has a potential to multiply your account everyday and i have experienced it, however only issue is it doesn't have martingale and trail option which I have requested to Sensie Tanaka San to add, and after this addition, this EA will turn Diamond from Gold.

I have updated the settings so you can use it on default, no set file or further settings required.

I again request to Tanaka San if he can only add martingale and trail in it to make it 100% profitable I will be very thankful to him and rest all order comments and other settings will remain same.

Regards and have a nice weekend.

Zaman Ahmad Khan
Click to expand...
Hi Zaman, if you are creator of this EA, can you explain strategy behind this system? Thanks a lot..
 
Ahmad Khan said:
My dear friend, I have already shared a video with settings in this forum, however please find below revB4 version settings. I have used below setting on H1 for EURGBP/USDJPY/EURUSD/AUDUSD/GBPUSD/USDCAD/EURJPY.

It takes proper entry but also takes time so do not complain that it is not picking up any trade, it takes time to pick a trade if current signal still active and have not hit TP, so keep switch between pairs to check which one is more closer to the signal.

I have attached the file because I strongly believe I will get a reply also by different users to attach EA also :D:D:D

Attached EA/Robot is same, only I have just renamed it because I have other versions also in my computer so it was difficult to remember from which I got better results so please do not be confused.

In case if you are not getting better results then must be your broker issue, however I am using it on FBS cent account at the moment and trades are being picked and closed on profit. I passed it to my friend also who is using standard account and he is also having good results.

As it is bigger time frame EA so news doesn't effect on its performance because either you will be in a trade or your trade would be in pending order to pick and even if there is a news and signal changed then pending order will be deleted automatically and placed by new order. Beauty of indicator is that it will give signal only when all of its programmed indicators will be on same point of direction and that is why it always close a trade with profit.

I believe i have provided maximum information so now ENJOY :cool::cool::cool:.

Zaman Ahmad Khan

View attachment 66204
Click to expand...
Thank you very much Ahmad! I appreciate your help!
 
Ahmad Khan said:
I have received so many inbox messages for my another EA/Robot Zaman Khan ScoopyzaM and people try to confuse other members as they gave a reference of other robot which created more confusion to others, so please find below attached file which I have posted here in the group to avoid any confusion.

In order to use it, as EA based on history data and no indicator is used, so before using it, download concerned pair history data and better results are on M5 and more secure on M15, so its your choice. As mentioned above it is based on history data so whenever you will do backtest, you will find different results however all results will end on maximum profit so do not try to match result figures to confuse yourself.

Do back test it before running it on live, however EA has a potential to multiply your account everyday and i have experienced it, however only issue is it doesn't have martingale and trail option which I have requested to Sensie Tanaka San to add, and after this addition, this EA will turn Diamond from Gold.

I have updated the settings so you can use it on default, no set file or further settings required.

I again request to Tanaka San if he can only add martingale and trail in it to make it 100% profitable I will be very thankful to him and rest all order comments and other settings will remain same.

Regards and have a nice weekend.

Zaman Ahmad Khan
Click to expand...
I have some questions:
1. Which pairs can use for 1000 cent?
2. How to download history in new account, when try it from History center it impossible.
 
Ahmad Khan said:
My dear, i have used USDJPY/EURUSD/GBPUSD/AUDUSD.

Either press F2 on your keyboard or press tools and then History center. Double click on the pair you would like to trade and then double click on time frame so its color will change to green, means it will enabled. Then press download button and if any pop up alert comes, click yes all the time. After that you will see it will start downloading history and once it will be done, your close button on screen will be enabled so press it.

Once it will be downloaded, you can start your trading and in case if it gives you zero history, then must be due to market close as it happens sometimes by some brokers so wait for market to open after weekend.
Click to expand...
For 10000 Cent what must be Lots and MinLots? Risk?
 
Last edited:
Ahmad Khan said:
My dear, i have used USDJPY/EURUSD/GBPUSD/AUDUSD.

Either press F2 on your keyboard or press tools and then History center. Double click on the pair you would like to trade and then double click on time frame so its color will change to green, means it will enabled. Then press download button and if any pop up alert comes, click yes all the time. After that you will see it will start downloading history and once it will be done, your close button on screen will be enabled so press it.

Once it will be downloaded, you can start your trading and in case if it gives you zero history, then must be due to market close as it happens sometimes by some brokers so wait for market to open after weekend.
Click to expand...
In my eyes useless.....is there a SL?
I don t think that this strategy won t do it more than 2 months!
 
Godwin said:
Hi all! As a programmer for a long years and also a researcher, I have gone round to find ways to download hst automatically. And one thing is just needed to do that as I discovered.

Just update the EA code by adding iOpen, iClose, iHigh, and iLow of the 240 chart as required by the EA to operate since it reads 240 hst.
Just a single line at the ontick/start function.

Due to my careful study of the code line, I noticed some bugs which need to be corrected.
It is: The init() function is called once and the ReadFileHst() function in it will also be called once. Which means that the EA will need to be reattached to the chart for it to read hst or to update.
Solution: Move the ReadFileHst() function from the init() function to start function and add the line of code which include open, close, etc of 240 timeframe.

If you consider the above, you will have a perfect dynamic EA. THANKS ALL
Click to expand...
Could you change the code for us?? Thankyou for your input
 
Godwin said:
Hi all! As a programmer for a long years and also a researcher, I have gone round to find ways to download hst automatically. And one thing is just needed to do that as I discovered.

Just update the EA code by adding iOpen, iClose, iHigh, and iLow of the 240 chart as required by the EA to operate since it reads 240 hst.
Just a single line at the ontick/start function.

Due to my careful study of the code line, I noticed some bugs which need to be corrected.
It is: The init() function is called once and the ReadFileHst() function in it will also be called once. Which means that the EA will need to be reattached to the chart for it to read hst or to update.
Solution: Move the ReadFileHst() function from the init() function to start function and add the line of code which include open, close, etc of 240 timeframe.

If you consider the above, you will have a perfect dynamic EA. THANKS ALL.
Click to expand...
Hi, did you find the strategy? What are the rules for trade open in this EA?
 
Godwin said:
The open, close , etc forces the update of hst file for the timeframe required. In this case its 240. Is the same as opening the chart for that pair and timeframe. So no need to download hst manually.
Click to expand...
you can simply help by adding the code and posting it here. That will be helpful. Could it be the reason why the EA reads history randomly ? I believe it reads the history randomly because that is that the only reason why its backtest produces different results on the same set
 
Godwin said:
Hi all! As a programmer for a long years and also a researcher, I have gone round to find ways to download hst automatically. And one thing is just needed to do that as I discovered.

Just update the EA code by adding iOpen, iClose, iHigh, and iLow of the 240 chart as required by the EA to operate since it reads 240 hst.
Just a single line at the ontick/start function.

Due to my careful study of the code line, I noticed some bugs which need to be corrected.
It is: The init() function is called once and the ReadFileHst() function in it will also be called once. Which means that the EA will need to be reattached to the chart for it to read hst or to update.
Solution: Move the ReadFileHst() function from the init() function to start function and add the line of code which include open, close, etc of 240 timeframe.

If you consider the above, you will have a perfect dynamic EA. THANKS ALL.
Click to expand...
Thank you for your input Godwin , can you please help us and save it with v1 so that we can know which one
 
Godwin said:
Backtest produces different result because the total period of test has hst and when the test is started, the EA reads the whole history and works with it throughout the test. But when in live, the hst is dynamic since it is being updated every time (tick). Some EA,s have been on chart since this year and if it be this EA, then the hst read was the past hst and the current hst after the EA was attached to chart will not be read, which means then that the EA will be dealing with current situation with too old hst so result will never be the same.
Click to expand...
i really think there is more to it, i'm not counting that out but it not enough reason to provide entire different results, EA reopens trades once it notices changes in the trend so the delay or old history will result in minimal different in it results. however what we are talking about here is 100percnt winning trades in a test and another with 9 losses or so. This is the reason why i believe that its reading history randomly.
.... just my 2 cents
 
Hello, how are you doing this weekend? Thank you for your kind messages. I am very glad to know if you enjoy EA I coded.:D
I will try to code as many EA as possible but my time is limited and sorry that I can not check all thread.
For those who can not work with News filter (got web site error), I fixed the code and modified EA.
Can you test with attached EA if you fail with news filter? It is already weekend and market is closed, so EA may not show any news events, but I bet there is no errors this time. Have a nice weekend!:D:ok:

Hello, Tanaka Akiko! Can you provide me with the mq4 version of the file EA_Jum+StoCh+v2.5F(revC).ex4, or earlier version mq4 with news filter. My e-mail: [email protected]. With respect, Roman.
 
Last edited:
tanaka akiko said:
Hello, how are you doing this weekend? Thank you for your kind messages. I am very glad to know if you enjoy EA I coded.:D
I will try to code as many EA as possible but my time is limited and sorry that I can not check all thread.
For those who can not work with News filter (got web site error), I fixed the code and modified EA.
Can you test with attached EA if you fail with news filter? It is already weekend and market is closed, so EA may not show any news events, but I bet there is no errors this time. Have a nice weekend!:D:ok:
Click to expand...
Mr tanaka i am running at demo tickmill and demo FBS, still time news trouble
 
Francisco jose said:
hi mr tanaka,

you could change this option to buy limit and sell limit, buy limit and sell limit pips away. remove the news filter and set hours to call and close. News filter does not work.View attachment 66072
Click to expand...
Hi, Francisco
I changed the indicator to VQ and replaced to limit order per you requested.:ok::)
 

Attachments

Enrico2 said:
Hi Mr Tanaka i found this indicator "ACB Forex Trading Suite 5.7" i think will be good have an Expert with this system. With MM/Risk percentage or autolot, partial closes, trailing stop

See video attach how it works




Thanks for your hard work!
Click to expand...
This is a good indicator. But you have to be patience with this indicator. I've checked the buying and selling positions are placed at the resistance and support level. Very good.
 
Reader mode
You must log in or register to reply here.
Back
Top