• Welcome back! Thank you for being a part of this Traders Community. Let's discuss and share :)
    Selamat datang kembali! Trimakasih telah menjadi bagian dari Komunitas Trader ini. Mari berdiskusi dan berbagi :)

Suggestion I will make a Free EA with your Indicator

Reader mode
tanaka akiko said:
OK, so you want blow

Take-Profit: 1x size of the candle's entire body.
Stop-Loss: 10 pips above/below the tail.

What about Pin bar with no real body, which means takeprofit is too small, isn't it?

What else input parameter do you want?
Click to expand...

T/P: Size is entire body that means from tail to end.
S/L: 10 pips below or above according to the formation of the candle .

Pinbar will not a big body is also found just follow S/L above the tail, according to candle formation and TP is the total size of the candle.

Simple input parameters are just fine. No need to complicate things here. Just entry taking conditions have to follow nicely...
 
fxgalib125 said:
Pending order at Half size of the pinbar, and Quarter size of the pinbar :) I hope I can make it understand. Isn't that possible dear?

example-pin.png

Look at this, if not possible pending then on real-time if reaches quarter and a half take entries????
Let me know tanaka akiko
Click to expand...

That is posible... but need some hard work, the problem is its very difficult to detect perfect pinbar... first u must describe the dimension of pinbar it self... for example...

Candle height = 100%

Nose height = not exced 10% of candle height

Body height = not exced 20% of candle height

Tail height = not exced 70% of candle height

If u describe like this... may be tanaka or some good programmer can code it for u....
 
fxgalib125 said:
T/P: Size is entire body that means from tail to end.
S/L: 10 pips below or above according to the formation of the candle .

Pinbar will not a big body is also found just follow S/L above the tail, according to candle formation and TP is the total size of the candle.

Simple input parameters are just fine. No need to complicate things here. Just entry taking conditions have to follow nicely...
Click to expand...
I coded with your logic...but maybe I think we need some modification with tp/sl.
 

Attachments

redhawk said:
Dear Mr. Tanaka,
I tested again Zaman Martingala last version with settings attached, but there is a problem, it don't increases lots in Martingala as you can see, can you fix the problem?
Thanks
Click to expand...
I tested with your set file, but lot size is increasing.
How about your backtest? Are you talking about FT?
By the way lot size is too big, maybe 0.01 lot is better.
upload_2019-5-20_20-11-13.png
 

Attachments

  • upload_2019-5-20_20-11-13.png
    upload_2019-5-20_20-11-13.png
    8.9 KB · Views: 1,012
tanaka akiko said:
I coded with your logic...but maybe I think we need some modification with tp/sl.
Click to expand...
I'm sorry to say there nothing has been matched. Please take a look at the attached images that the Pinbar's were not correct and missed the genuine pinbars which we should be trading. A pinbar's tail have to be 3 times longer than the body , the body can only have a small nose.

Please concentrate on visuals to see what's wrong there to get the perfect entries...
 

Attachments

  • Solution_Pinbar.png
    Solution_Pinbar.png
    199.3 KB · Views: 93
  • Solution_Pinbar2.png
    Solution_Pinbar2.png
    199.2 KB · Views: 78

Attachments

  • Clipboard02.jpg
    Clipboard02.jpg
    73.1 KB · Views: 1,001
  • Clipboard01.jpg
    Clipboard01.jpg
    61.6 KB · Views: 999
  • TL_by_Demark_v6.mq4
    TL_by_Demark_v6.mq4
    13.4 KB · Views: 121
  • 313166_ICMarketsLive02AUDU.gif
    313166_ICMarketsLive02AUDU.gif
    2.8 MB · Views: 968
Last edited:
tanaka akiko said:
EMA200 filter works very good.
Click to expand...

Tanaka ser .. i think u use 2 TMA indicator on this EA code
1. TMA CG mladen never repaint.ex4
2. TMA+CG mladen NRP.ex4

both are the same indicator with different name.
EA can run without problem when this 2 indicator already on indicator folder
but when i put just TMA+CG mladen NRP.ex4 on indicator folder
Ea stil can run but give different results

i think TMA setting parameter on EA just control "TMA CG mladen never repaint.ex4"
, and "TMA+CG mladen NRP.ex4" run on default setting.
or the opposite.. i don't know :D

can u pls check the code ..
 
[QUOTE = "easylorry, post: 311224, membro: 52051"] Meu recém-construído Indicador de Paris estratégias mistas Tanaka Fico Feliz em Anuncia Publicamente [ATTACH = completo] 85657 [/ ATTACH] [ATTACH = full] 85657 [/ ATTACH] [ATTACH = completo] 85658 [/ ATTACH] [ATTACH = completo] 85657 [/ ATTACH] [ATTACH = completo] 85658 [/ ATTACH] [/ QUOTE]
Muito top parabens amigo compartilhar
 
fxgalib125 said:
I'm sorry to say there nothing has been matched. Please take a look at the attached images that the Pinbar's were not correct and missed the genuine pinbars which we should be trading. A pinbar's tail have to be 3 times longer than the body , the body can only have a small nose.

Please concentrate on visuals to see what's wrong there to get the perfect entries...
Click to expand...

tyyy.png


tanaka akiko Check the power of correct Pinbar (Hammer) in a daily chart. A Perfect Pinbar can make the trading a lot simpler, easier and a lot of guaranteed profits. See how I have locked the entries from mid-night to now. I had to wake up in the night, analyze and find perfect pinbars and trade like that. Hopefully, buy limits hit and now turning back from reversal and I'm 99% sure that T/P will be hit. I just wanted to make this system automatic while I don't need to wake up in mid-night to do this. I'm very hopeful to you that you might help me, dear.

I call this strategy "Pinbar Killer" haha>:)
 
Dear tanaka akiko ...why the EA TMACG mladen giving the wrong signal here ? why SELL trigger ? should not it BUY ?


Screen Shot 2019-05-20 at 21.47.53.png
 

Attachments

  • Screen Shot 2019-05-20 at 21.47.53.png
    Screen Shot 2019-05-20 at 21.47.53.png
    43.8 KB · Views: 972
[QUOTE = "easylorry, post: 311223, member: 52051"] Meu recém-projetado Indicador de estratégias mistas Tanaka Feliz em anunciar publicamente [ATTACH = full] 85657 [/ ATTACH] [ATTACH = full] 85657 [/ ATTACH] [ATTACH = completo] 85658 [/ ATTACH] [ATTACH = full] 85657 [/ ATTACH] [ATTACH = completo] 85658 [/ ATTACH] [/ QUOTE]
Vc montou um tópico para vender seu indicador porque não compartilha com agente pediu para o Tanaka fazer um EA para vc se eu fosse ele não fazia de graça
 
Reader mode
You must log in or register to reply here.
Back
Top