Suggestion I will make a Free EA with your Indicator

[tejas]

hai saidi, reversal was FALSE mode .so far i only adjust max order 10 to 1 .
need advise so curretly i test 1tf, need help this work tf 4h with condition oeder base on blue and red indicator not follow the pips.

 

[tanaka akiko]

Exactly! So the strategy will be completely proportional to the "Risk" parameter!

I added MaxLot_Multi.
If you use risk percent, then order lot size is changed and total lot size which you can place order is MaxLot size.
For example, MaxLot_Multi=10, then your Max order lot size is current order lot size total x MaxLot_Multi.
Now you have 3 orders and total lot size is 0.1 x 3 =0.3 LOT.
Then 0.3 x MaxLot_Multi(=10) = 3Lot. So you can place another order but it should be less than 3lots.
You can change MaxLot_Multi. Please test.

 

[tanaka akiko]

mr tnaka can you make this EA open like EA_rsi ma mtf alerts arrow d1 let hope we get a better EA

Nice idea!


EU with attack martin (indicator TF=H1, EA attached TF=M5)


EU M5 without martin attack

 

[hoang123]

I think this is the version of super arrow and the setfile that Ronaldo Marcel is using.
I'm still not FT, so sorry if I'm wrong.

https://soehoe.id/i-will-make-a-free-ea-with-your-indicator.t9801/page-333#post-277230

 

[tejas]

hai Tanaka Sifu need help to modify ea ,which curretly i test 1TF, need help this work TF 4h or TF day EA just open order when blue/red dot comes .
For example, if arrow signal for SELL comes, then Buy order is closed and open sell
order and vise versa and its not follow tp and EA just open order when blue/red dot comes .
神のお恵みがありますように

 

[tanaka akiko]

THANKS FOR THE GOOD WORK. MASTER TANAKA. I HAVE BEEN TESTING AND WORKING TIRELESSLY ON A4 FOR TWO DAYS NOW . I WAS ABLE TO GET WINNING SETTING FOR IT. I WILL SOON POST THE RESULT AND SETTING. A3 AND A4 IS ABOUT LOGIC SETTING .WE NEED THE LOGIC SETTING TO BE SHOWING ON THE E.A INPUT-SETTING TO ENABLE US CHANGE THE MARTINGALE ADDITION DATA OR NUMBER. MR TANAKA. PLS KINDLY MAKE THE MARTINGALE DATA TABLE AVAILABLE ON TH E.A INPUT-SETTING. SO WE CAN TEST WITH DIFFERENT ADDITIONAL MARTINGALE. NUMBER.
PLS MAKE THIS TABLE AVAILABLE AND VISIBLE ON A4 INPUT SETTING.
______________________________________________________________________________
0.01 | 0.02 | 0.03 | 0.04 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 | 0.10
_____|________|_______|______|_______|_______|______|______|______|___________
0.01 | 0.01 | 0.02 | 0.03 | 0.04 | 0.05 | 0.06 |0.07 | 0.08 | 0.09
_____|________|_______|______|_______|_______|______|______|______|___________

Please try.

 

[tanaka akiko]

hai Tanaka Sifu need help to modify ea ,which curretly i test 1TF, need help this work TF 4h or TF day EA just open order when blue/red dot comes .
For example, if arrow signal for SELL comes, then Buy order is closed and open sell
order and vise versa and its not follow tp and EA just open order when blue/red dot comes .
神のお恵みがありますように

Close with opposite signal?
Please upload indicator.

 

[xander cage]

In your set, how many orders do you have at the same time?

I only use the first two of the three strategies, differentiating the pipsteps so they are never aligned..I give max 7 orders to one strategy and max 3 to the other, but it's not a definitive set..so with the "MaxLots" parameter following the "Risk" one, we can decide that the max amount of the lots won't exceed a precise number...it will be surely safer!

 

[xander cage]

I added MaxLot_Multi.
If you use risk percent, then order lot size is changed and total lot size which you can place order is MaxLot size.
For example, MaxLot_Multi=10, then your Max order lot size is current order lot size total x MaxLot_Multi.
Now you have 3 orders and total lot size is 0.1 x 3 =0.3 LOT.
Then 0.3 x MaxLot_Multi(=10) = 3Lot. So you can place another order but it should be less than 3lots.
You can change MaxLot_Multi. Please test.

Wow, I missed your msg! I'll let you know in a few mins, and thanks a million times

 

[xander cage]

I added MaxLot_Multi.
If you use risk percent, then order lot size is changed and total lot size which you can place order is MaxLot size.
For example, MaxLot_Multi=10, then your Max order lot size is current order lot size total x MaxLot_Multi.
Now you have 3 orders and total lot size is 0.1 x 3 =0.3 LOT.
Then 0.3 x MaxLot_Multi(=10) = 3Lot. So you can place another order but it should be less than 3lots.
You can change MaxLot_Multi. Please test.

Let's see if I understood the parameter correctly: if I start with, for example, 2 orders of 0,10 lots with the "MaxLot_Multi" parameter set to 20, the total amount of the orders placed after the first two will be of max 4 lots total, right?
So, let's say I have "LotExponent" = 2...
I'll have: 0,10 - 0,20 - 0,40 - 0,80 - 1,60 for one strategy... the total sum is 3,10 lots...
Plus, the second strategy goes like this: 0,10 - 0,20 - 0,40...and the total sum is now 3,80 lots...from now on, nothing can be opened until this group of orders will be closed, am I right?

Or maybe the "MaxLots_Multi" is only referred to the place of a single order that can't exceed that value?

Anyway in backtest it seems that none of the two options is working..maybe I understood it in the wrong way?

 

[tejas]

Close with opposite signal?
Please upload indicator.

 

[omarbns]

Nice idea!
View attachment 73092

EU with attack martin (indicator TF=H1, EA attached TF=M5)
View attachment 73093

EU M5 without martin attack
View attachment 73094

thank you mr tanaka

 

[tanaka akiko]

Let's see if I understood the parameter correctly: if I start with, for example, 2 orders of 0,10 lots with the "MaxLot_Multi" parameter set to 20, the total amount of the orders placed after the first two will be of max 4 lots total, right?
So, let's say I have "LotExponent" = 2...
I'll have: 0,10 - 0,20 - 0,40 - 0,80 - 1,60 for one strategy... the total sum is 3,10 lots...
Plus, the second strategy goes like this: 0,10 - 0,20 - 0,40...and the total sum is now 3,80 lots...from now on, nothing can be opened until this group of orders will be closed, am I right?

Or maybe the "MaxLots_Multi" is only referred to the place of a single order that can't exceed that value?

Anyway in backtest it seems that none of the two options is working..maybe I understood it in the wrong way?

Correct. You have total orders 3,8 LOT, then MaxLot_Multi=20, so it should not over 4 Lot. Nothing can be opened until this group of orders will be closed

 

[xander cage]

Correct. You have total orders 3,8 LOT, then MaxLot_Multi=20, so it should not over 4 Lot. Nothing can be opened until this group of orders will be closed

Perfect it seems that this parameter doesn't work in backtest, is it possible?

 

[tanaka akiko]

can someone please make EA based on this indicator? this logic works very nice on NY and London section, thanks so much!

Looks good!
I add indicator TF, so you can change TF for the indicator.
For example, you change TF=M5 and attach the EA on TF M1 chart.
Then EA will read signal from TF M5 data and place oder in TF M1 chart.


EU M5 (with attack martin)


EU M5 (default)

 

[tanaka akiko]

Perfect it seems that this parameter doesn't work in backtest, is it possible?

Really? It should work. You mean total lot size is over 4lots?

 

[tanaka akiko]

Hello Mr. Tanaka! I found the bot attached is very good but only demo. You can make a functional bot.

thank you

I can only code from the indicator!

 

[xander cage]

Really? It should work. You mean total lot size is over 4lots?

I tried to put a high and then a low "MaxLot_Multi" value..it seems that it opens the same amount of lots, as if it doesn't affect the orders

 

[tanaka akiko]

Thank you Mr. Tanaka.
Yes this is the indicator and here is the ex4 file. Here are the things I need.I also give you the broken EA that programmer gave me.
1.The robot should take and close order according to color.(see pic)
2.It should work on a small account say..20 dollars.
3.please add sl . tp. break even, break even start , trailing ,trailing start with it.
4.the robot should also have Delta , method , period changing option inside.
5.it should also draw the line in chart.
6.text and line can be bigger if you can.(see pic)

I coded with my templete.
EU M5

 

[Andres Manrique]

Hi Mr. Tanaka, could you please make an EA from this indicator? Buy when indicator turns blue and sell when turns red, please add parameters:
Lot size
Option for SL or close when change color the same for TP and how many pips
Trailing stop
I promise to upload set file if works good and it's profitable
Thanks Mr. Tanaka