Grid Hero is a fully automated EA that uses the revolutionary mesh algorithm (PAMA) and the signature synergy of the Price Action transaction and the artificial instinct adaptive processing unit.
Grid Hero is rigorously developed, tested and optimized using a "reverse sampling" development approach based on the "in-sample" phase (2012-2017) and the "out-sample" phase (2004-2011).
It has passed 13 years of measured data and actual variable spread (with commission) testing from 2004 to 2017.
It also passed the Monte Carlo robustness test, which included 2000 trade randomization simulation runs and simulated delay slip tests.
Nature
Suggest
parameter
The author's description of ea is at https://www.mql5.com/zh/ Market/p ... ab=comments&page=89, the author uses the default settings, and provides 3 sets of files with their own management.
Author's instructions for use: Grid Hero Quick User Guide - Please read before using EA...
Recommendation:
EA settings: Use default settings or automatic batch setup files.
Symbol: EURUSD (Do not use on other currency pairs).
Time limit: H1 chart (do not use in other time periods).
Broker: ECN broker, low spread/commission, 1:400 leverage, non-FIFO or FIFO, allowing for micro trades.
Minimum deposit: $3,000.
Live Trading Instructions:
Simply drag and drop Grid Hero EA onto the EURUSD H1 chart.
In the EA menu, enter your broker's winter GMT offset (if you are unsure, please consult your broker)*
will all Other EA settings are left as default settings. Or enable automatic batch adjustment by applying additional standard/medium/high risk kit files
* Note: The winter GMT offset default value in EA is set to 2, matching most brokers.
Real-time transaction list:
in the EA menu Under the Common tab, make sure "Allow real-time trading" is checked
on your MT4 terminal (at the top), make sure the "AutoTrading" button is enabled (green)
on the chart, making sure you see the smiley face in the upper right corner of the chart
On the chart, you should see the “Today's Optimized Trading Hours” displayed in the upper left corner of the chart
on your MT4 terminal (at the bottom), check the “Experts” and “Diary” tabs to make sure no error messages are displayed.
Back to Test Description:
Select symbol: "EURUSD"
during the selection: "H1"
select type: "every tick"
to spread: standard MT4 tester set "15" (points), or if you use the Tick data suite Birt set "Variable"
in Under the Expert Properties >> Tests tab, set the “Initial Deposit” to $3,000 (the recommended minimum amount) to
use the default EA settings for conservative risk performance (disable automatic batch adjustment)
or apply an additional automatic batch set based on your risk preferences. Auto Lot Risk Levels: Standard / Medium / High
If you prefer, you can start back testing from 2004.
When using the Birt Tick Data Suite for reverse testing, make sure you are in Tick Data Settings. The following settings are set correctly:
Under the Basic tab, set the GMT offset to "+2". This value follows the "Broker's Winter GMT Offset" value set in the EA.
Under the Basics tab, set DST to "US". This is the location of your broker's server.
Under the Basics tab, turn on Use Variable Propagation.
Under the "Advanced" tab, enable "Leverage" and set it to "1:400".
Choose your risk setting:
Conservative risk: Use default EA settings (no need to set up files)
Standard risk: Apply car batch standard risk settings file
Medium risk: Apply automatic batch number medium risk setting file
High risk: Apply vehicle batch high risk setting file
Fixed capital vehicle batch: Set “Enable fixed capital automatic batch confirmation” to true, and set fixed fund amount (no need to set file)
Grid Hero is rigorously developed, tested and optimized using a "reverse sampling" development approach based on the "in-sample" phase (2012-2017) and the "out-sample" phase (2004-2011).
It has passed 13 years of measured data and actual variable spread (with commission) testing from 2004 to 2017.
It also passed the Monte Carlo robustness test, which included 2000 trade randomization simulation runs and simulated delay slip tests.
Nature
- Built-in PIPS average math algorithm (PAMA).
- Built-in fast forward and quick release stripping technology.
- Built-in trend detection across multiple time ranges.
- Built-in time filter, wave filter and spread spectrum filter.
- Built-in price action team module.
- Built-in manual instinct adaptive processing unit.
- Built-in news filters and news display panels.
Suggest
- EA settings : Use default settings or settings files.
- Symbol : EURUSD.
- Time range : H1.
- Broker : ECN broker, low spread/commission, 1:400 leverage, non-preemptive or first-in, first-out.
- Trading conditions : measurement.
- Minimum deposit : $3,000.
parameter
- Start batch : initial batch
- Batch plus : batch plus value
- Maximum batch size : maximum batch size
- Enable automatic batch adjustment on fixed funds: Limit automatic batch to fixed funds amount
- Assign a fixed amount of funds to an automatic batch: set the amount of funds for the automatic batch (minimum: 3000)
- Enable automatic batch size : for starting batch, batch adding and maximum grid batch
- Balance per lot size step : If you enable automatic batch size, the balance step for each lot size
- Batch size step : If automatic batch size is enabled, batch size step value
- Maximum batch size : If automatic batch size is enabled, the maximum size of the batch
- Maximum trading volume : maximum number of transactions
- Maximum slip point (in points) : the maximum number of slip points
- Magic number : magic number
- Transaction Review : Transaction Review
- Enable FIFO : Enable FIFO mode (for FIFO proxy)
- Grid Step: Minimum Grid Step
- First order profit: first order profit
- Grid basket minimum pip profit: minimum pip for grid basket profit
- Enable single grid cycle : single grid cycle mode
- Enable fast profit mode at all times : always the lowest profit mode
- Close all trades and stop trading : close all trades and stop trading immediately
- For the first time enabled order entry filter: first order entry time filter
- Select trading time filtering mode: 2 different time filtering modes
- Broker's Winter GMT Offset: Only available for built-in optimized trading time mode
- User-defined transaction start time (your broker server time) : only for user-defined transaction time mode
- User-defined transaction end time (your broker's server time) : only for user-defined trading time mode
- Enable volatility filter for first-order entries : volatility filter first-order entry
- Enable Price Action Troopers: Price Action Troopers Module for First Order Input
- Enable manual instinct processors and modules: artificial instinct processor units and modules
- Enable Delay Monday Start : Enable Delay Monday Start
- Monday start time (your broker's server time) : Monday start time
- Enable Friday morning off : Enable Friday off
- End time Friday closing transaction enabled : Friday ending time closing transaction
- Friday closing trading mode : Friday closing time to close trading mode
- Friday end time (your broker server time) : Friday end time
- Automatically align Friday end time (if trading time filter is enabled) : Automatically align at Friday end time
- Trading Sunday ~ Saturday : Enable one-week single-day trading
- Enable propagation filter : Enable propagation filter
- The maximum point difference (in points) : maximum expansion filter point difference
- Enable balance protection : Enable balance protection and features
- Enable push notifications : Enable push notifications
- News Filter Enabled: Enable News Filter
- Enable display panel : Enable display panel
The author's description of ea is at https://www.mql5.com/zh/ Market/p ... ab=comments&page=89, the author uses the default settings, and provides 3 sets of files with their own management.
Author's instructions for use: Grid Hero Quick User Guide - Please read before using EA...
Recommendation:
EA settings: Use default settings or automatic batch setup files.
Symbol: EURUSD (Do not use on other currency pairs).
Time limit: H1 chart (do not use in other time periods).
Broker: ECN broker, low spread/commission, 1:400 leverage, non-FIFO or FIFO, allowing for micro trades.
Minimum deposit: $3,000.
Live Trading Instructions:
Simply drag and drop Grid Hero EA onto the EURUSD H1 chart.
In the EA menu, enter your broker's winter GMT offset (if you are unsure, please consult your broker)*
will all Other EA settings are left as default settings. Or enable automatic batch adjustment by applying additional standard/medium/high risk kit files
* Note: The winter GMT offset default value in EA is set to 2, matching most brokers.
Real-time transaction list:
in the EA menu Under the Common tab, make sure "Allow real-time trading" is checked
on your MT4 terminal (at the top), make sure the "AutoTrading" button is enabled (green)
on the chart, making sure you see the smiley face in the upper right corner of the chart
On the chart, you should see the “Today's Optimized Trading Hours” displayed in the upper left corner of the chart
on your MT4 terminal (at the bottom), check the “Experts” and “Diary” tabs to make sure no error messages are displayed.
Back to Test Description:
Select symbol: "EURUSD"
during the selection: "H1"
select type: "every tick"
to spread: standard MT4 tester set "15" (points), or if you use the Tick data suite Birt set "Variable"
in Under the Expert Properties >> Tests tab, set the “Initial Deposit” to $3,000 (the recommended minimum amount) to
use the default EA settings for conservative risk performance (disable automatic batch adjustment)
or apply an additional automatic batch set based on your risk preferences. Auto Lot Risk Levels: Standard / Medium / High
If you prefer, you can start back testing from 2004.
When using the Birt Tick Data Suite for reverse testing, make sure you are in Tick Data Settings. The following settings are set correctly:
Under the Basic tab, set the GMT offset to "+2". This value follows the "Broker's Winter GMT Offset" value set in the EA.
Under the Basics tab, set DST to "US". This is the location of your broker's server.
Under the Basics tab, turn on Use Variable Propagation.
Under the "Advanced" tab, enable "Leverage" and set it to "1:400".
Choose your risk setting:
Conservative risk: Use default EA settings (no need to set up files)
Standard risk: Apply car batch standard risk settings file
Medium risk: Apply automatic batch number medium risk setting file
High risk: Apply vehicle batch high risk setting file
Fixed capital vehicle batch: Set “Enable fixed capital automatic batch confirmation” to true, and set fixed fund amount (no need to set file)
