- Credits
- 0
Suggestion 1000% profit, never lose your trade anymore
- Thread starter AutoProfit
- Start date
Please, can you refer me to the page for the updated version of the corrAutoBot indicator. The first one you attached to this thread says i Should download latest version. Thank you
- Credits
- 0
Hi Gregmay,
We found a few bugs, and right now we are trying to fix them.
We will immediately post it again if it has been successfully upgraded.
Thank you for your response
Please, can you refer me to the page for the updated version of the corrAutoBot indicator. The first one you attached to this thread says i Should download latest version. Thank you
- Credits
- 0
I'm waiting. I wish you success. Many thanks in advance.
- Credits
- 0
ya.. masih lakukan koreksi untuk update supaya hasil indi lebih akurat
- Credits
- 0
Please speak English. We have been waiting for the update. Thanks in advance
- Credits
- 0
This is my review for this thread:
Seem like a good thread but I came late and did not have a chance to get a working indicator or EA as they all expired.
Seem like a good thread but I came late and did not have a chance to get a working indicator or EA as they all expired.
i. Please note that free version only allow 0.01 lot size.
ii. For some brokers, Demo and Real servers may differ. So what works well in Demo may not necessary works the same in Real. I am not responsible for any losses.
1. What is it?
Lazy Arbitrage MT4 is very easy to setup bot that works both as a Server and Client for the Arbitrage process! Arbitrage is a process where you set up expert advisers on 2 end - fast and slow to take advantage of small course differences.
2. How does it work?
Lazy Arbitrage Server should be set up to a fast broker - every instance on any pair, without modifying any settings. Lazy Arbitrage Client should be set up on a slow broker and open positions when there is a desired difference in bid/ask on the server/client side. Average position holding time is 1-2 seconds on forex market.
3. What should You know?
Arbitrage trading is a controversial way of trading and may not be accepted by some brokers. Some brokers may change conditions, deactivate your account or cancel profits. Some may also generate some first false-good results on demo, so test it for at least 7 days before launching it on live account. Knowing that, use it at your own responsibility.
4. PDF Instruction
Parameters
ii. For some brokers, Demo and Real servers may differ. So what works well in Demo may not necessary works the same in Real. I am not responsible for any losses.
1. What is it?
Lazy Arbitrage MT4 is very easy to setup bot that works both as a Server and Client for the Arbitrage process! Arbitrage is a process where you set up expert advisers on 2 end - fast and slow to take advantage of small course differences.
2. How does it work?
Lazy Arbitrage Server should be set up to a fast broker - every instance on any pair, without modifying any settings. Lazy Arbitrage Client should be set up on a slow broker and open positions when there is a desired difference in bid/ask on the server/client side. Average position holding time is 1-2 seconds on forex market.
3. What should You know?
Arbitrage trading is a controversial way of trading and may not be accepted by some brokers. Some brokers may change conditions, deactivate your account or cancel profits. Some may also generate some first false-good results on demo, so test it for at least 7 days before launching it on live account. Knowing that, use it at your own responsibility.
4. PDF Instruction
Parameters
- Side of connection - selection between either "Server Mode" or "Client Mode".
- Interface Type - graphical interface. Change between faster (comment) and slower (graphics) interface.
- 1.1 Base lot size - size of lot without money management. If you set up too small lot, the smallest allowed lot will be opened instead.
- 1.2 Money Management ON/OFF - Enable / Disable function.
- 1.3 Money Management Value - Value of base balance for MM function.
EXAMPLE: If MM is ON, this is set up to 1000, while equity is 10000, base lot will be increased by x10. - 1.4 Emergency SL EA Stop (percentage) - if EA is occurring losses you may protect your equity with this option.
EXAMPLE: If starting with $1000 and option is set to 33.0 then dropping to $770 will cause robot to activate STOP LOSS. This stop-loss may be only reactivated by restart. - 1.5 Solid SL in PIPS (0 for OFF) - solid stop loss – change to ZERO while trying out new pairs with greater numbers – like USDSEK is 8.xxxx. This is solid stop loss for each transaction.
- 2.1 Required difference to start trading - required opportunity size (difference between server and client including spreads on both sides).
- 2.2 Slippage allowed in PIPS - if slippage is greater than set position should not open.
WARNING: Some brokers may block your account if this value is too low! On many brokers this option will not work at all. - 2.3 Time to re-check opportunity - time in ms to re-check if difference still occurs (against lags). Smaller values for forex market, greater for stock market.
- 3.1 Manual Pair Override - if for some reason client does have other pair names than server.
EXAMPLE: If Server pair is named EURUSD, and client is EURUSD.m, then you don't need to modify this option. Only first 6 letters of the symbol are checked. - 3.2 Magic Number - modify this option if you want to use multiple separate connections on one pair. Each "tunnel" should have its own magic number.
- 3.3 Display information about trading - you may enable being alerted with information about each opened transaction or open attempt.
You started this thread in March 2017 and asked everyone to give you 5 stars rating reviews. Members faithfully supported you. It's already Nov 2020 and you still have not provided any update on your indicator (not asking about Premium EA, just a working indicator!). What happened to all the fans who faithfully followed and supported you ?? OMG! Apakah menurutmu kita akan merasa dibohongi pak?
Correlation Trading is not new. GoMarkets provided Correlation Trader in MT4 Genesis Free of Charge. To use all the tools, just need to open an account with GoMarkets and trade with them. https://www.gomarkets.com/au/correlation-trader-in-mt4-genesis/
- Credits
- 0
Rosalina,i. Please note that free version only allow 0.01 lot size.
ii. For some brokers, Demo and Real servers may differ. So what works well in Demo may not necessary works the same in Real. I am not responsible for any losses.
1. What is it?
Lazy Arbitrage MT4 is very easy to setup bot that works both as a Server and Client for the Arbitrage process! Arbitrage is a process where you set up expert advisers on 2 end - fast and slow to take advantage of small course differences.
2. How does it work?
Lazy Arbitrage Server should be set up to a fast broker - every instance on any pair, without modifying any settings. Lazy Arbitrage Client should be set up on a slow broker and open positions when there is a desired difference in bid/ask on the server/client side. Average position holding time is 1-2 seconds on forex market.
3. What should You know?
Arbitrage trading is a controversial way of trading and may not be accepted by some brokers. Some brokers may change conditions, deactivate your account or cancel profits. Some may also generate some first false-good results on demo, so test it for at least 7 days before launching it on live account. Knowing that, use it at your own responsibility.
4. PDF Instruction
Parameters
- Side of connection - selection between either "Server Mode" or "Client Mode".
- Interface Type - graphical interface. Change between faster (comment) and slower (graphics) interface.
- 1.1 Base lot size - size of lot without money management. If you set up too small lot, the smallest allowed lot will be opened instead.
- 1.2 Money Management ON/OFF - Enable / Disable function.
- 1.3 Money Management Value - Value of base balance for MM function.
EXAMPLE: If MM is ON, this is set up to 1000, while equity is 10000, base lot will be increased by x10.- 1.4 Emergency SL EA Stop (percentage) - if EA is occurring losses you may protect your equity with this option.
EXAMPLE: If starting with $1000 and option is set to 33.0 then dropping to $770 will cause robot to activate STOP LOSS. This stop-loss may be only reactivated by restart.- 1.5 Solid SL in PIPS (0 for OFF) - solid stop loss – change to ZERO while trying out new pairs with greater numbers – like USDSEK is 8.xxxx. This is solid stop loss for each transaction.
- 2.1 Required difference to start trading - required opportunity size (difference between server and client including spreads on both sides).
- 2.2 Slippage allowed in PIPS - if slippage is greater than set position should not open.
WARNING: Some brokers may block your account if this value is too low! On many brokers this option will not work at all.- 2.3 Time to re-check opportunity - time in ms to re-check if difference still occurs (against lags). Smaller values for forex market, greater for stock market.
- 3.1 Manual Pair Override - if for some reason client does have other pair names than server.
EXAMPLE: If Server pair is named EURUSD, and client is EURUSD.m, then you don't need to modify this option. Only first 6 letters of the symbol are checked.- 3.2 Magic Number - modify this option if you want to use multiple separate connections on one pair. Each "tunnel" should have its own magic number.
- 3.3 Display information about trading - you may enable being alerted with information about each opened transaction or open attempt.
Interesting indeed. Can you make a new thread because I would like to ask some questions? But I will ask two questions here if I may as the thread author seems to have stopped in this thread.
So I get two dealer accounts open, one fast and one slow..I get it. Are the trades always placed in just one of the accounts or on both sides? Also would "0.30 lotsize trades" in 5 pairs (EURUSD, USDJPY, NZDUSD, AUDUSD, GBPUSD make enough to cover the cost to purchase this EA?
I realize that my second question is difficult to answer because of all the variables involved. But does 0.30 lotsize seem reasonable? (I trade in a group and am limited to my exposure of a max of 0.30 per 6k)
ElectricSavant
P.S. Earlier in my career I did extensive research on this and even had an EA written, but you have seemed to have simplified it with your creation.
Last edited:
Here is a working version of FX Correlation AutoBot by Pankaj Bhaban.
1. TimeFrame is M15.
2. You need 3 charts to be opened : EURUSD, GBPUSD and USDJPY.
3. I use setting of Lot = 0.04 and TakeProfit = 10 because my balance is $2000. If your balance is $500 and below, use Lot = 0.01 and TakeProfit = 2.5. For other balance amount, please adjust accordingly.
4. You can set StopLoss = 0 because the EA is dynamic meaning it will close on reversal of entry signal.
5. The Lot, TakeProfit and StopLoss setting are the same for all 3 charts but make sure you have the Symbol1, Symbol2 and AddMagic number set correctly as given in the screenshot attached.
Recommend you use a VPS to run 24 hours.
~Rosa.
Good Luck & Green Pips Always!
1. TimeFrame is M15.
2. You need 3 charts to be opened : EURUSD, GBPUSD and USDJPY.
3. I use setting of Lot = 0.04 and TakeProfit = 10 because my balance is $2000. If your balance is $500 and below, use Lot = 0.01 and TakeProfit = 2.5. For other balance amount, please adjust accordingly.
4. You can set StopLoss = 0 because the EA is dynamic meaning it will close on reversal of entry signal.
5. The Lot, TakeProfit and StopLoss setting are the same for all 3 charts but make sure you have the Symbol1, Symbol2 and AddMagic number set correctly as given in the screenshot attached.
Recommend you use a VPS to run 24 hours.
~Rosa.
Good Luck & Green Pips Always!
Attachments
i. Please note that free version only allow 0.01 lot size.
ii. For some brokers, Demo and Real servers may differ. So what works well in Demo may not necessary works the same in Real. I am not responsible for any losses.
1. What is it?
Lazy Arbitrage MT4 is very easy to setup bot that works both as a Server and Client for the Arbitrage process! Arbitrage is a process where you set up expert advisers on 2 end - fast and slow to take advantage of small course differences.
2. How does it work?
Lazy Arbitrage Server should be set up to a fast broker - every instance on any pair, without modifying any settings. Lazy Arbitrage Client should be set up on a slow broker and open positions when there is a desired difference in bid/ask on the server/client side. Average position holding time is 1-2 seconds on forex market.
3. What should You know?
Arbitrage trading is a controversial way of trading and may not be accepted by some brokers. Some brokers may change conditions, deactivate your account or cancel profits. Some may also generate some first false-good results on demo, so test it for at least 7 days before launching it on live account. Knowing that, use it at your own responsibility.
4. PDF Instruction
Parameters
- Side of connection - selection between either "Server Mode" or "Client Mode".
- Interface Type - graphical interface. Change between faster (comment) and slower (graphics) interface.
- 1.1 Base lot size - size of lot without money management. If you set up too small lot, the smallest allowed lot will be opened instead.
- 1.2 Money Management ON/OFF - Enable / Disable function.
- 1.3 Money Management Value - Value of base balance for MM function.
EXAMPLE: If MM is ON, this is set up to 1000, while equity is 10000, base lot will be increased by x10.- 1.4 Emergency SL EA Stop (percentage) - if EA is occurring losses you may protect your equity with this option.
EXAMPLE: If starting with $1000 and option is set to 33.0 then dropping to $770 will cause robot to activate STOP LOSS. This stop-loss may be only reactivated by restart.- 1.5 Solid SL in PIPS (0 for OFF) - solid stop loss – change to ZERO while trying out new pairs with greater numbers – like USDSEK is 8.xxxx. This is solid stop loss for each transaction.
- 2.1 Required difference to start trading - required opportunity size (difference between server and client including spreads on both sides).
- 2.2 Slippage allowed in PIPS - if slippage is greater than set position should not open.
WARNING: Some brokers may block your account if this value is too low! On many brokers this option will not work at all.- 2.3 Time to re-check opportunity - time in ms to re-check if difference still occurs (against lags). Smaller values for forex market, greater for stock market.
- 3.1 Manual Pair Override - if for some reason client does have other pair names than server.
EXAMPLE: If Server pair is named EURUSD, and client is EURUSD.m, then you don't need to modify this option. Only first 6 letters of the symbol are checked.- 3.2 Magic Number - modify this option if you want to use multiple separate connections on one pair. Each "tunnel" should have its own magic number.
- 3.3 Display information about trading - you may enable being alerted with information about each opened transaction or open attempt.
Attachments
Eva Sachova
New Member
- Credits
- 0
Hi Rosalina, thank you for sharing, but I can't apply Lazy Arbitrage to the chart. Don't know where the problem may be?
- Credits
- 0
Thanks
- Credits
- 0
Selalu diminta the latest version, tdk bisa digunakan